Tips for Keeping Your Tile Flooring Glossy and Shiny

Though not typically the center of attention, your flooring makes all the difference to your house’s interior design. Its color and finish should perfectly complement the finishes, fixtures, and furniture pieces. Aside from significantly adding to your home’s aesthetic appeal, this surface plays a big role in your guest’s safety. Slips and falls can be minimized by choosing a slightly rough material. In addition, it has to handle the demands of daily foot traffic, pet claws, and food or drink spills.

With these factors in mind, it’s crucial to choose the right flooring system. The most popular option is tile, which may be made of cement, ceramic, porcelain, stone, marble, granite, or slate. They’re all unmatched in terms of durability, water resistance, versatility, beauty, and cost-effectiveness. Another main selling point is how easy they are to maintain. Here’s how you can keep these pieces looking spotless and polished.

Sweeping and Vacuuming

When you spend some time outdoors, your shoe soles pick up dirt and dust and drop these particles into your home where they settle on the tile flooring. Also collected and scattered around this surface are hair strands, dander, food crumbs, and other solid particles. When these get wet, they’ll turn into hard-to-remove gunk on and in between the tiles. This dulls the appearance of tile.

To keep debris from accumulating and turning into grime, sweep the floor at least once a week. There are different cleaning tools used for various tiles. For ceramic and porcelain, it’s best to go with a microfiber duster. Meanwhile, soft-bristled brooms are recommended for marble, granite, and other natural stones. It’s also a good idea to use a vacuum cleaner.


For more thorough cleaning, mop the surface with special solutions that can be made at home. The best part is that most of these may be prepared with items found in the pantry or laundry.

Vinegar-Based Cleaner

This sour kitchen staple contains acetic acid, an organic compound known to effectively deodorize and kill bacteria, preventing infections and other germ-related invaders. To make use of this ingredient on your floor, simply combine 1 part distilled white vinegar and 1 part warm water in a bucket. Dip a mop into the mixture, wring out the excess, and clean away. You may also transfer the solution to a spray bottle and spritz it onto a spot before wiping it up.

Ammonia and Water Solution

For tiles that have stains or blemishes, you’ll need a much stronger agent, such as ammonia. This clear liquid breaks down layers of built-up grime, revealing a piece’s original appearance. Mix a cup of this substance with a gallon of warm water in a bucket. Pour the mixture over the floor and let it sit for 3 to 5 minutes before scrubbing with a nylon or plastic scouring pad.

When working with this kind of solution, be sure to keep the area ventilated and wear safety gear, including nose masks and gloves. Taking these measures will prevent the ammonia from irritating your skin, nose, throat, and respiratory tract.

Scrub tile flooring Bellevue wa

Baking Soda Paste

Another homemade remedy for discolored tiles is a baking soda paste. Sodium bicarbonate’s rough texture has the ability to break down even the toughest dirt and grime formations. To make this natural cleaning agent, combine equal parts of the powder and warm water and stir until it reaches a thick consistency. With a soft-bristled toothbrush, scrub the mixture onto the tiles and grout. Give the paste time to dissolve the built-up gunk by letting it sit for 10 minutes before rinsing.

Deep clean your tiles with any of these agents at least once every 1 or 2 months.


In some cases, the reason tile flooring looks dingy and uninspiring is dirty grout. This can be fixed with a quick reapplication. Before you perform this job, be sure to put on safety glasses, a dust mask, gloves, and boots for protection.

Remove the old grout from the floor with the help of a dull blade or an oscillating tool and brush away the debris. Once the seams are clear, fill them with freshly prepared mortar. While it’s still moist, wipe away the excess with a damp sponge. Wait for it to dry completely before washing off the thin film that coats the tiles.

Contact Eastside Design Group for expert advice on tile flooring in Bellevue, WA. You can find us online at or call 425-654-4144.


Leave a Reply

Your email address will not be published. Required fields are marked *

+ 56 = 59